Video tips

Airpump & Pressure relief adapter

Inflate Grabner Boat

With the Airpump, the boat is inflated and ready for use in a few minutes.
Pump until the Pressure Relief Adapter releases air, then you have reached the optimum air pressure.

 

Set pressure gauge to zero

Maintenance

Pressure gauges are sensitive to shock and over time can indicate incorrect pressure - too much or even too little - without being noticed.

For long life, it is important that your boat is always inflated to the correct operating pressure. Setting your pressure gauge correctly is quite simple and takes only 20 seconds.

As an alternative, we recommend the Pressure Relief Adapter. It reliably releases when the correct operating pressure is reached and is very robust.

Setup Grabner Boat

In only 3 minutes

Easy and quick assembly of the GRABNER HOLIDAY 2 inflatable kayak.

Packing Grabner boat

In only 3 minutes

Before packing, you should empty the water from the boat. To do this, turn the boat upside down and let the water run out of the hole in the stern. Let out the air in the bottom and dry the boat with a cloth.

Now you can fold the boat along the bottom center once over and then fold it lengthwise. Finally, it is stowed in the pack sack or backpack.

Steering device kayak

STABLE ON COURSE

RECOMMENDATION: When you paddle in pairs, the kayak is easier to steer with the Steering Device. Current, waves and wind are easily corrected with the steering device, without you having to steer with the paddles.

motor bracket kayak

Electric propulsion

For particularly relaxed rides, you can also attach an electric motor to the stern instead of the steering device with the motor bracket kayak.

At full throttle, you'll ride about 10 km/h and cover about 20 km in 2 hours on one battery charge. At 5 km/h, which is the average paddling speed, you can ride up to 9 hours and cover about 45 km.

Motor-Bracket ADVENTURE

Electric propulsion

For particularly relaxed rides, you can attach an electric motor to the stern of the ADVENTURE with the motor bracket-ADVENTURE.

At full throttle, you'll ride about 10 km/h and cover about 20 km in 2 hours on one battery charge. At 5 km/h, which is the average paddling speed, you can ride up to 9 hours and cover about 45 km.

Glue Grabner rubber boat skin

easy and durable

The Grabner rubber boat skin can be easily glued like a bicycle tube. This also allows practical fittings to be glued onto the boat skin.

Masthead Float Mounting + Securing

reliable buoyancy

When using the masthead float on the Grabner HAPPY CAT, the mast will reliably float on the water surface in case of capsize.

Assembly Furling-Booster

More performance

For even more sailing fun in light winds, there is the so-called Furling-Booster. This sail allows approx. 30% higher speeds in light winds than the standard jib.